Expert Answers about Flat Mount Trailer Coupler
- What is Handle of Flat Plate Mount Demco Trailer Coupler eZ Latch Made Of
- I checked with Demco and the handle on the Demco Trailer Coupler - Flat Plate Mount - eZ-Latch # DM15080-97 is made of a nylon composite. That is a fancy way of saying it is made of plastic although this is a highly durable plastic. The composite is engineered specifically for strength and will work in temperatures that range from -20 degrees to 200 degrees fahrenheit so the handle is extremely durable and able to withstand rugged use and conditions.
The Demco # DM15080-97 coupler is...
view full answer... - Bulldog Collar-Lok Coupler - Gray - Adjustable Channel Mount - 2-5/16 Ball - 12,500 lbs Origin
- The Bulldog Collar-Lok Coupler - Gray - Adjustable Channel Mount - 2-5/16" Ball - 12,500 lbs # BD028585 is made in China. Bulldog is a registered brand of Horizon Global Corporation and is based in Plymouth, Michigan.
We also offer the Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Primed - 2-5/16" Ball - 12,500 lbs
Item # DM05557-97 which is manufactured in Boyden, Iowa.
view full answer... - Is Bulldog Heavy-Duty Cast Head Coupler Made of Cast Iron?
- The Bulldog Heavy-Duty Cast Head Coupler # BD44150WH301 is actually made out of cast steel. It also has a zinc finish in order to protect it from corrosion. This coupler has an A-frame design and mounts to a 50-degree trailer tongue. I've added a link to a video review of this product for you to take a look at.
view full answer... - What Material is the Trailer Coupler Latch Lock # 2878DAT Made From
- The 7/8" Wide Trailer Coupler Latch Lock # 2878DAT is made of hardened steel.
As far as how easy it is to defeat, ultimately any lock can be defeated given enough time and the right tools. Since there is no gauge of how "breakeable" a specific lock is, we recommend making your setup look intimidating to deter would-be thieves.
If you are wanting to deter theft of your trailer when it is coupled then the Bulldog # BD580404 is a great option because it has a coupler lock and a ball mount...
view full answer... - Is The Hitch Ball Welded To The Mount Plate On the Reese Above-Bed Gooseneck Trailer Hitch #RP58079?
- The Reese Above-Bed Gooseneck Trailer Hitch - 25,000 lbs, # RP58079, has a 2-5/16 inch hitch ball that is held in place with a snap ring. This design allows the hitch ball to rotate reducing binding with the gooseneck coupler. It has a nice powder coat finish to resist corrosion and the hitch ball is a durable, heat treated ball.
If you are looking for a welded option, you may be interested in the Curt 25K Gooseneck Plate for Fifth Wheel Rail item # 16055, or the Curt Spyder Gooseneck...
view full answer... - Are the Optronics LED Light Kit Water Resistant
- The Optronics LED Light Kit, # 98174LED, is designed as a sealed unit that make them resistant to weather.
Unfortunately, we don not have a flat bracket for these lights.The Trailer Light Mounting Brackets, # BK70BB, may be able to flattened so you can be able to mount then on the outer edge of your bike rack.
view full answer... - Trailer Hitch Receiver Made In The USA For a 2022 Nissan Pathfinder
- Yes, we do have the Curt Trailer Hitch Receiver # C46DR which is made in the USA for your 2022 Nissan Pathfinder. Do note that while the receiver is made in the USA some of the mounting hardware may be imported.
The T-One Vehicle Wiring Harness # TK58VR will provide you with a 4-way flat connector. This connector is needed for the lights on most small trailers you might tow as well as with Auxiliary Lights # C53201 with any hitch mounted accessory that impairs the view of your vehicle...
view full answer... - Is Command Electronics LED, Surface Mount, Dual Tail Light Flexible
- I went out to the warehouse and pulled the Command Electronic Dual LED, Surface Mount, Tail Light # CE86FR. which you referenced, and found that the mounting surface is a rigid, sturdy plastic material which will not allow for much flexibility.
view full answer... - Trailer Hitch Made in USA and Wiring Recommendation for a 2016 Subaru Outback
- Draw-Tite trailer hitch # 75673 for the 2016 Subaru Outback is made in Mexico. Curt trailer hitch # C13206, also for your 2016 Subaru Outback, is made in the USA. But, per Curt warranty requirements, all non-trailer loads (bike racks, cargo carriers, etc) must be supported by stabilizing straps, such as # 18050, sold separately. So if you are going to be using the hitch for anything other than towing you would need the strap.
If you are going to do some towing I recommend etrailer ball...
view full answer... - What Are Yakima Shear Blocks Y8810006 and Yakima Shear Block Bases Y8810007 Made Out Of
- The Yakima Shear Block # Y8810006 you mentioned are made out of aluminum, and the Shear Block Bases # Y8810007 are made out of a tough Zytel nylon.
You may be able to modify these to secure your Yakima round bars to the side of your trailer, but these towers were designed to attach to rain gutters like what you would find on some Jeeps. You may be able to modify these components to allow them attach to a flat surface but I do not have any information on what would need to be done.
To...
view full answer... - Trailer Hitch Extension For Bike Rack To Clear Opened Tailgate On Toyota Tundra
- You will find that opening a tail gate all the way is just not possible with a hitch mounted bike carrier on a pickup truck. Since the tail gate extends so fat beyond the bumper when opened it would require a bike carrier to almost lay flat.
Using any adapter or extension in your trailer hitch will reduce the capacity of the trailer hitch by 50 percent.
An adapter like part # 80300 would extend the hitch and possibly give you the clearance you need for your Kuat bike carrier. This extension...
view full answer... - What are the CE Smith Post-Style Guide-Ons Made Of
- Yes, the pipe will spin freely on the CE Smith Post-Style Guide-Ons part # CE27670. I called my contact at CE Smith and they informed me that the pipes are made of a standard schedule 40 PVC. You are more than welcome to go to your local hardware store to get a longer set but we do offer these in 40" tall part # CE11339 and 60" tall part # CE11354. You can always just trim what you don't need off with a hacksaw.
view full answer...
Go To Results